Cruising With Mickey Countdown

Disney Crafts

I wanted to create some excitement for our children in the weeks leading up to our big Disney Vacation. A friend of mine had made a Disney countdown for her children. Hers was awesome and had some great educational aspects to it, but I wanted mine to be more geared towards the cruise instead of a general Disney theme.

Here is what I came up with.

titleThis chalkboard paddle countdown was very easy to make, and maybe even a little educational (they got to practice writing their numbers). I picked up all of the supplies very cheaply at Michael’s. Supplies were: Wooden paddle, chalkboard paint, sparkly alphabet stickers and Pirate Mickey scrapbook stickers, paint brush . I also used a piece of paper, pencil, and scissors to make the template for the painted mickey head. Oh and don’t forget the chalk!


1. Draw a Mickey head on a piece of paper that will fit on your paddle. Cut it out and trace it onto the bottom of your paddle with a pencil.

2. Carefully paint the outside of your Mickey head with the chalkboard paint and then fill the outline. Wait until it fully dries before adding a second, and then third, coat of paint.

3. Decorate as you wish with stickers. Stickers that are meant for scrapbooking will be a lot more durable than regular stickers.

And that’s it! Now your children will have fun doing their countdown each day, and getting more and more excited about their trip! On the morning that we left I put the countdown at the bottom of the stairs and had drawn a big zero on the countdown. When the children came down the stairs they were thrilled to see that there were no more days left and it was time to go!


So much fun!

Thank you for stopping by today!


Disney Crafts


Are you taking yourself and your little Princess on a Disney Vacation? Part of the fun is all of the dress up and the bling that goes along with it! And I’m going to let you in on a little secret ~ if you make yourself some hair accessories at home, it will be A LOT cheaper than buying the Disney Park or Disney Cruise stuff. Of course you are going to want to buy yourself some ears as souvenirs, but the bows and accessories, those are easy to make! I bought a very cheaply made, flimsy, head band on my Disney Cruise to wear with my formal dress and it cost $16. Of course I thought in my head {Ahhh, I could have made this for about $3} So I thought I would bring you a couple of ideas and tutorials so that you don’t make the same mistake I did!

How about a stacked bow headband? There are lots of great shops on Etsy that sell beautiful Disney Ribbon. I bought mine from a shop called Bottle Cap Art Supplies. For a stacked bow, you basically need at least three different bow elements to stack together.

Mine was made with a Spike Bow on the bottom, a Surround-a-bow in the middle, and then my own creation (or at least one I just played around with and figured out on my own) The Quadruple Bow, which I will explain now.

The Quadruple Bow is the red bow with white polka dots in my stacked bow picture. You will need 30″ of 1 1/2″ ribbon, a needle and thread. Here are the instructions:







Creating the stacked bow is very easy. Take your three prepared bows. On the bottom I had my spiked bow, then I layered the surround-a-bow on top, and last I put down my quadruple bow. Run a needle (and thread) up through the middle of all three layers. Wind the thread around the centre of your bow a few times and then run the needle back through the centre. Trim your thread. Next take a piece of 3/8 inch ribbon about 2″ long. Put a dab of hot glue on the back of your bow and wrap the ribbon around the centre to hide the thread. Secure it onto the back with another dab of hot glue. Now you can put some jewels or anything in the middle to decorate your bow. Here is what I did to make mine a little more “Disney”.


Here is a super easy idea to jazz up any hair accessory and make it Disney themed.

Mickey Jewel Head Supplies: Decorative bottle cap, small scrap of felt or fabric, 1 x 10mm plastic jewel, 2x 8 mm plastic jewels, glue gun and glue.

All you have to do is cut out a circular piece of fabric or felt that will fit inside the bottle cap, glue it inside. Then glue the 10mm jewel in the centre towards the bottom, and the two 8mm jewels are glued in the “ear” positions. Then glue your decorative Mickey head to your hair accessory.

When I was picking out the jewels at Michael’s, I couldn’t open the box to see how big the jewels were in relation to each other. You will notice that my Mickey ears are probably a bit too large. The jewels I actually used were 10mm for the head, and 9mm for the ears – so I have corrected the size in the instructions.

Now that your bow is done, you can either glue it to a hair clip, or a hair band like I did. To do this I cut out two felt circles. I glued one circle to the back of the bow. I then put some hot glue on the other side of that felt circle, positioned the bow where I wanted on the hair band, and glued the other felt circle so that the hair band was sandwiched in between.


Here is another hair bow I did. I used the Ribbon Retreats: Ribbon Flower Bow Tutorial. Instead of gluing the jewels to the bottle cap, I glued them directly to the bow.

mickey loop

And lastly I wanted to share this Pirate bow I made for a friend’s daughter. Again I have used the Spike Bow tutorial. I had these really cute skull and cross bone buttons and I glued one to the centre of this bow. Perfect for a pirate party on your Disney Cruise!



And here are some of my favorite ones from around the web that I DID NOT create: 13 Disney Inspired Princess Ribbon Sculptures from the Grosgrain Fabulous blog. Aren’t these gorgeous?? There are full tutorials for each one, just click on the picture of the one you would like to make.



This one I came across last week during a link party. This Minnie Mouse Headband tutorial was made by Sarah at Craft Quickies. I think I am going to make one for my niece before she heads to Disneyland in the fall. It is so darling, and that baby just makes it look even cuter!


I hope you have enjoyed this post, thank you for stopping by!


Dress Up Time ~ Cinderella Peasant Dress



Today I am going to share this simple Cinderella Peasant Dress costume {size 2T} with you. I think little chores are much more fun when you are dressed like Cinderella! Peasant dresses are very easy sewing projects, in fact I think that one of my very first sewing projects was a peasant dress. When I first learned how to make one, I followed a great tutorial from Pretty Prudent. This Cinderella dress is just a slight variation from this peasant dress. Since most of the steps are the same, except for the skirt, I don’t want to re-write someone else’s tutorial. Instead I will have you read their tutorial and tell you what I did differently.

Here are the supplies that you will need, for the dress only. I will tell you about the apron after the dress is out of the way!


~Fabric: You will need three different colors, but it’s all plain cotton. I found mine in the bargain bin, it does not have to be expensive! Sleeves: Light/Sky Blue 1/4 yard, Bodice: Dark/Chocolate Brown 1/4 yard, Skirt: Light/Coffee Brown 1/2 yard.

~35″ of 1/4″ elastic.

~Thread and basic sewing supplies

Below are the measurements for the dress. You will cut two of the bodice pieces on the fold. Cut along the red lines to create an armhole (a basic J shape, 6″ down) and a sloping neckline.

You will also need to cut two of the skirt pieces, and two of the sleeves (on the fold).

Size 2T

Cinderella Peasant Measurements

Cut out all of your pattern pieces above. You are going to make the bodice by following the instructions here: Long Sleeve Peasant Dress Tutorial. Start from Step 2: Cut Out Neckline and Armhole. To be clear, while you are following the peasant dress tutorial, you will be using the two bodice pieces and the two sleeve pieces to create the bodice. You will not be doing anything with the skirt until you come back to this page.

DO NOT: Hem the bottom of the dress (bodice) or insert elastic into the sleeves.

Creating The Skirt

You should now have your bodice made, with the finished sleeves attached. The bodice should have a raw edge along the bottom. Are we on the same step? Good, let’s create the skirt and finish the dress. Take your two rectangular skirt pieces and sew them right sides together down both of the shorter sides with 1/2″ seam allowance. Use a zig-zag stitch to finish the seam. Press your seams flat. Fold the bottom of your skirt over 1/4″ to the wrong side and press with your iron. Fold it over again and press; hem the bottom of your skirt. Sew a gathering stitch around the top of your skirt and make sure it is the same width around as the bottom of your bodice.

Attach Skirt to the Bodice

Pin the top of the skirt to the bottom of the bodice, right sides together. The easiest way is to have your bodice turned right side out, and your skirt inside out. Place your bodice upside down into the top of the skirt and pin around the top. It is a good idea to tuck the sleeves out of the way so that they don’t get in the way of your sewing. Sew the bodice and skirt together using a 3/4″ seam allowance. Use a zig-zag stitch to finish off the edge of the seam.

Press the seam upwards (towards the bodice) with your iron. Now you are going to stitch along the top of the seam, all the way around, to create an elastic casing (make sure you are using thread that matches the chocolate brown bodice). Leave 2″ open so that you can insert your elastic. Take 20″ of 1/4″ elastic and attach it to a safety pin. Thread it through the casing. Sew the ends of the elastic together and then sew the opening shut.

And that’s all! I left the elastic out of the sleeves because I noticed that Cinderella’s sleeves are loose, but of course you could make yours any way you wish.

pic2 pic3

I also made an apron with an applique to go along with the dress. It was very time consuming, and it was my first attempt at creating something like this, but here is a quick look at how I did it.

First I found a clip-art picture online of one of the bird characters from Cinderella, here is what my applique was supposed to look like:


I have to say that my little bird didn’t turn out quite so happy looking, rather a little worried looking!

Supplies used: various scraps of fabric, heat n bond, black thread, basic sewing supplies.

I printed the bird and cut it out around the outer edges. I pinned it to some blue fabric that already had some heat n bond applied to the back of it. I cut the bird shape out of the blue fabric (leave the back of the heat n bond on, do not peel it off yet)


Next I cut out pieces of the bird that were not blue (ie the hat, vest, beak, etc…) and pinned them to coordinating colors of fabric – these pieces of fabric also had heat n bond applied to the back. I cut out each little piece of the bird and applied them to my blue main bird piece, like a puzzle. Peeling off the back of the heat n bond I pressed each piece into place with my iron. Here is the little bird coming together:

pic5 pic6

After all of the pieces were in place I peeled off the backing on my main (blue) bird piece and positioned it where I wanted on the apron skirt. Then, using black thread, I stitched all of the features and outlines onto the bird. I used a zig-zag stitch, setting the length at almost zero. The width of the stitch varied, as you can see that some of the lines on the bird are thicker than others – for example the black parts of the eyes are also done using a wide zig-zag stitch.


apronIt can be pretty tricky to get the facial details just right, as I mentioned before, my bird seems to look a bit worried and the original picture the bird looked happy! As for the Cinder-Calleigh lettering, I don’t have a fancy embroidery sewing machine so this is just done freehand, again with a zig-zag stitch on a very short stitch length setting.

Thanks for stopping by today, I hope you have enjoyed this post!